Mini Cooper Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
14 Posts
Hi. Just finished installing the non-LED aux driving lights onto my 2014 F56S without LED options. The factory instructions were confusing and had significant errors. With the help of fellow forum member GregoryK, I was able to do the job and wrote up a set of "corrected" instructions. GregoryK has a good tutorial on how to get the bumper off. I believe he has it posted on the NAM forums.

The attached instructions worked for my 2014 F56S - I make no guarantees or warranties, but will help if needed with questions. Read through the whole booklet before starting. There are a few special tools and extra parts (mentioned in my notes) you will want to have on hand before starting. Special thanks again to GregoryK. Best of luck to you.

Hi Subguy,

Thanks for the note! It's pretty awesome. :cool:
I just got my LED Aux Driving Light today, and I'll follow your steps to install.

But I have some question about the A6 screw on the fuse box.
I saw you mention the clamp it's behind/back-side of the fuse box.
So I need to remove entire fuse box and turn to back side?
Or just release the fuse box?

I found some f56 fuse box's images on google, but I can't understand where to screw the A6?
71932
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top