When I plugged it in, the screen didnot light up at all, Any idea? 😕
had to swapped back to 6.5" screen
Thank you
had to swapped back to 6.5" screen
Thank you
8.8” screen retrofit for ENTRYNAV
Hi guys,
Today, my 8.8” screen from eBay arrived!
![73686]()
First, I ran into some trouble with only half of the screen showing. Apparently others have had this problem when using BimmerCode.
After using E-Sys to do the (exact same) coding, it works. It even plays nicely with my Andream CarPlay MMI.
![73687]()
Now that everything’s working, I’ve ordered the rest of the parts needed.
You need the bigger CID: 65509367674
And the plastic trim: 65509354400
The required coding options are:
Today, my 8.8” screen from eBay arrived!
First, I ran into some trouble with only half of the screen showing. Apparently others have had this problem when using BimmerCode.
After using E-Sys to do the (exact same) coding, it works. It even plays nicely with my Andream CarPlay MMI.
Now that everything’s working, I’ve ordered the rest of the parts needed.
You need the bigger CID: 65509367674
And the plastic trim: 65509354400
The required coding options are:
- DISPLAY_SIZE_RESOLUTION = 8.8_1280x480
- DISPLAY_VARIANTE = breites_display
1 - 5 of 34 Posts
Its working now with coding below 🤓 mine with satnav
3005 DISPLAY_PIP_CONFIG CID_DISPLAY_RES Display-Resolution for CID from 800x480 to 1280x480
3005 DISPLAY_PIP_CONFIG CID_DISPLAY_SIZE Display-Size for CID from 6.5 to 8.8
3001 EXBOX DISPLAY_VARIANTE Display_Variante schmal to breites
3006 NAVIGATION DISPLAY_SIZE_RESOLUTION change from 800x480 to 1280x480
3005 DISPLAY_PIP_CONFIG CID_DISPLAY_RES Display-Resolution for CID from 800x480 to 1280x480
3005 DISPLAY_PIP_CONFIG CID_DISPLAY_SIZE Display-Size for CID from 6.5 to 8.8
3001 EXBOX DISPLAY_VARIANTE Display_Variante schmal to breites
3006 NAVIGATION DISPLAY_SIZE_RESOLUTION change from 800x480 to 1280x480
Attachments
1 - 5 of 34 Posts
