Mini Cooper Forum banner

Broken USB Port

22130 Views 22 Replies 11 Participants Last post by  lbillys
Waited four months for my new 2015 Hardtop.

Broke something in less than four days.

Go me!

Pin in the USB port is bent. I tried to bend the pin back myself, but it's really hard to get in there. Decided to give up and give the service department a call, but they want to charge me $150 and leave the car overnight just so they can "diagnose" the problem. Really? The problem is the pin is bent! Diagnosis done. It shouldn't take more than 30 seconds and a flashlight to see that!

Does anyone have any suggestions? I've searched high and low for information about getting the replacement part or disassembling that lower part of the dash, but I can't find anything. Worst case: if I knew how to take apart the dash, I would have a much easier time bending the pin back into place, or I could replace the USB port altogether (I'm an electrical engineer - I'm sure it's just a small part connected with some wires to the head unit).
  • Like
Reactions: 1
1 - 1 of 23 Posts
The 'original' BMW/Mini parts diagrams are at RealOEM: http://www.realoem.com

After you've visited once and searched for your own car, the site will remember that and jump straight to your model.
Good find that. Thanks for sharing.
1 - 1 of 23 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top