Mini Cooper Forum banner

1 - 20 of 32 Posts

·
Registered
Joined
·
638 Posts
Discussion Starter #1
Hi all,

Looking to do the above but can’t find it in Bimmercode where I would expect to see it, even in expert mode.

Has anyone done this successfully and if so can you help guide me to the menu I need to be in please?

Thank you ?
 

·
Registered
2016 Clubman Cooper
Joined
·
9 Posts
There's a post on a Taiwanese forum Mobile01 by 'toodge' on how to code the cornering fog lights very recently.

I have done the coding but it didn't seem to have worked. I suspect it might be because I have retrofitted the auto lights switch (which gives me the 11 o'clock auto setting for headlights) rather than having it fitted from the factory.

The instructions basically are:
1. Make sure you have auto light(one with the 11 o'clock position)
2. Code the following:

Section 3062:
MAPPING_ABBIEGEL_L_OUTPUT: off→tfl_l(the option I saw in bimmercode was fl_l)
MAPPING_ABBIEGEL_R_OUTPUT: off→tfl_r
(although I've seen people from other bmw forum saying they use nsw_l and nsw_r)
Section 3066:
KL_ENABLE_LI :KL_Aus→KL_Ein
Section 3073:
KL_ENABLE_RE : KL_Aus→KL_Ein
C_BLC_ENA :F015_disable→F015_enable
C_CLC_ENA :F015_disable→F015_enable


3. Test - left fog turns on when you turn the wheel left and off when it goes back to straight.
 

·
Registered
Joined
·
40 Posts
Hi All

Let me help you.

If you use bimmercode to code, please use expert mode to change this value.

Section 3062:
MAPPING_ABBIEGEL_L_OUTPUT : 03
MAPPING_ABBIEGEL_R_OUTPUT : 04

I try this code. it can work on car with auto light switch.
 

·
Registered
Joined
·
116 Posts
Hi All

Let me help you.

If you use bimmercode to code, please use expert mode to change this value.

Section 3062:
MAPPING_ABBIEGEL_L_OUTPUT : 03
MAPPING_ABBIEGEL_R_OUTPUT : 04

I try this code. it can work on car with auto light switch.
Is this under BDC module in bimmercode?
 

·
Registered
Joined
·
40 Posts
No. you need to code all lines.

Section 3062:
MAPPING_ABBIEGEL_L_OUTPUT : 03
MAPPING_ABBIEGEL_R_OUTPUT : 04

Section 3066:

KL_ENABLE_LI :KL_Aus→KL_Ein
KL_ENABLE_RE : KL_Aus→KL_Ein


Section 3073:

C_BLC_ENA :F015_disable→F015_enable (or 01 , please find this value on bimmercode)
C_CLC_ENA :F015_disable→F015_enable
(or 01 , please find this value on bimmercode)
 

·
Registered
2016 Clubman Cooper
Joined
·
9 Posts
No. you need to code all lines.

Section 3062:
MAPPING_ABBIEGEL_L_OUTPUT : 03
MAPPING_ABBIEGEL_R_OUTPUT : 04

Section 3066:

KL_ENABLE_LI :KL_Aus→KL_Ein
KL_ENABLE_RE : KL_Aus→KL_Ein


Section 3073:

C_BLC_ENA :F015_disable→F015_enable (or 01 , please find this value on bimmercode)
C_CLC_ENA :F015_disable→F015_enable
(or 01 , please find this value on bimmercode)
I don't think I saw a 03 and 04 option in Bimmercode expert mode when I did it. Is it a custom value?
 

·
Registered
Joined
·
116 Posts
Hi Sir

03 = nsw_l 04= nsw_r

I used esys to code this function. you can try on bimmercode.
Have you tried coding rear fog lights as brake light? I have F55 US model and I don't have switch on the panel for rear fog lights, only front fog light switch is there.
 

·
Registered
Joined
·
40 Posts
Hi Sir

My car is F54 clubman, the rear fog lights mapping is different with F55.

Maybe you can try to code this setting.

Section 3065
MAPPING_BREMSL_2_L_OUTPUT = nsl_l
MAPPING_BREMSL_2_R_OUTPUT = nsl_r
 

·
Registered
Joined
·
71 Posts
No. you need to code all lines.

Section 3062:
MAPPING_ABBIEGEL_L_OUTPUT : 03
MAPPING_ABBIEGEL_R_OUTPUT : 04

Section 3066:

KL_ENABLE_LI :KL_Aus→KL_Ein
KL_ENABLE_RE : KL_Aus→KL_Ein


Section 3073:

C_BLC_ENA :F015_disable→F015_enable (or 01 , please find this value on bimmercode)
C_CLC_ENA :F015_disable→F015_enable
(or 01 , please find this value on bimmercode)
I tried this on my F55 LCI with Auto light, does not work..


Sent from my iPhone using Tapatalk
 
1 - 20 of 32 Posts
Top