Mini Cooper Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
Hey guys,

My local BMW dealership salesman installed LED bulbs to replace the stock H4 halogen ones. I will be going to code them for him tomorrow, anyone know what's their name (They all have some sort of german name) and in what module I can find it? I already know this "NSW (Front Fog Light), NSL (Rear Fog Light), BL (Brake Light), WBL(Brake Middle Light), FRA (Turn Signal), RFS (Reverse Light).".

Thanks
 

·
Registered
Joined
·
235 Posts
Code exactly what?
LED headlamps are completely different, they also have self levelling systems.
Putting LED bulbs in H4 Headlamps is not legal in the UK.
 
  • Like
Reactions: Panch

·
Registered
Joined
·
1,189 Posts
I don't know the exact coding for the fog lights since mine are already LEDs, but here's the coding for LEDs on the reverse lights. I assume you can just swap out the right letters for the fogs (RFS --> NSW). All are under the BDC module and there are three per light. Not sure if the "L_IS_LED" is required or not, but I did anyway:

Backup (reverse) light left computer check off -- BDC 3061 - RFS_L_IS_LED aktiv
Backup (reverse) light left computer check off -- BDC 3061 - RFS_L_KALTUEBERWACHUNG nicht aktiv
Backup (reverse) light left computer check off -- BDC 3061 - RFS_L_WARMUEBERWACHUNG nicht aktiv
Backup (reverse) light left computer check off -- BDC 3061 - RFS_R_IS_LED aktiv
Backup (reverse) light left computer check off -- BDC 3061 - RFS_R_KALTUEBERWACHUNG nicht aktiv
Backup (reverse) light left computer check off -- BDC 3061 - RFS_R_WARMUEBERWACHUNG nicht aktiv
 
1 - 3 of 3 Posts
Top