Mini Cooper Forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
615 Posts
You should be able to use a rubber mallot to tap the trims off. Once loose you should be able to pull them off.

Have you thought about refurbishing them with some wire wool and chrome polish? Perhaps just paint them black with high temp paint?

Sent from my LG-H815 using Tapatalk
 

·
Registered
Joined
·
172 Posts
I'm looking to do the same. Could you please post (or PM me) the one you bought?

Thanks!

Here it is:
https://www.aliexpress.com/snapshot/8386045995.html?orderId=80057070081217&productId=32531768214

You have to choose the 57mm size.
As the exhaust tube is 55mm, you will have to add a piece of another tube between the tip and the exhaust.
The price is for one tip.
I bought it during a "black friday" so there was a 50% discount !!!
So it's worth to check.

Quality is good, and, for me, the look is fine ;)

 

·
Registered
Joined
·
55 Posts
Hi guys,
Sorry...Just a question.
Are the original end tips welded? Screw?
The inner diameter of the final part of the original exhaust on a JCW is also 63mm/2,5" tube? or 57mm?
I want at least change my end tips on original JCW exhaust.
My 06/2019 JCW with GPF won´t allow me the th change change for a full JCW pro exhaust... (dealership warranty)

So need help for cosmetic purpose only on my JCW.

Thanks.
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top