[BuddhaGB1]

Hi All,
So we recently purchased a former damage repaired Cooper S, as part of the repair the garage replaced the front bumper with a newer version that has the Front PDC sensors fitted. (Rear Camera and Sensors factory Fitted).
My question is can these be wired into the existing system and be made to work??
I’m assuming that extra parts / software may be needed?

 

[MaverickZ]

Yes, can be done.
Just 6 wires from the front bumper to the right rear pdc ecu.
Then change vo from 507 to 508.
I have done this on my F54, I'm about to put a how to over the bank holiday weekend.

 

[BuddhaGB1]

Thank you, wlll look forward to your how to. My initial enquiries all seemed to get a No can’t be done. So thanks again.

 

[MaverickZ]

How to retrofit front PDC on F54

The front PDC has 4 parking sensors fitted on the front bumper which requires 6 wires from PDC ECU to the front. So basically the retrofit is about how to connect the front PDC sensors and PDC ECU via 6 wires. I have successfully done this on my F54, I believe F56/F55/F57 should be the same. You...

www.minif56.com

Hope this can help.

 

[BuddhaGB1]

How to retrofit front PDC on F54

The front PDC has 4 parking sensors fitted on the front bumper which requires 6 wires from PDC ECU to the front. So basically the retrofit is about how to connect the front PDC sensors and PDC ECU via 6 wires. I have successfully done this on my F54, I believe F56/F55/F57 should be the same. You...

www.minif56.com

Hope this can help.

MaverickZ this is fantastic work. Thank you 👏👏👏

 

[Wojti77]

I thinking about retrofit PDC front sersors, at the moment I have PDC rear and rear camera.
Can somebody send correct manual coding for this retrofit?