Matrix LED headlights retrofit

6314 Views 16 Replies 11 Participants Last post by deathwalker, 1 mo ago

ThomasL

Discussion Starter · Jun 11, 2021

Yes, this is possible, and actually quite simple.
But
You need to get the headlights, and they are not cheap
You need E-Sys and a relatively new PSdZData, and you need to know how to use it (or know someone who does)
The F60 needs to have LED headlights (the "normal" ones) already
It also needs to have KAFAS for the camera based high beam assist.

If all these prerequisites are met, exchanging the lights takes about 15 minutes, and programming about 20.

Save

1 - 4 of 17 Posts

iron

· #11 · 6 mo ago

deathwalker said:
I've retrofitted the Matrix LED (552 Adaptive) on my 2017 F60 here a photo, you need to install the new headlights (obv) new FLE2 (the old led have FLE1 and can't manage matrix) and need to code the BDC as 2021 model and solve some problem with fog light if, like in my case, don't work couse of different type and wiring in pre-LCI models without "ring" light on foglights.

Here a photo of my 2017 F60 with matrix on it!

View attachment 77082

Hi Deathwalker! i saw u r italian MINI's owner. I'm too. Can u say to me where do u have retrofitted your fotonic F60? thank u very very much! Congratulation!

Save

iron

· #13 · 6 mo ago

deathwalker said:
I've retrofitted the Matrix LED (552 Adaptive) on my 2017 F60 here a photo, you need to install the new headlights (obv) new FLE2 (the old led have FLE1 and can't manage matrix) and need to code the BDC as 2021 model and solve some problem with fog light if, like in my case, don't work couse of different type and wiring in pre-LCI models without "ring" light on foglights.

Here a photo of my 2017 F60 with matrix on it!

View attachment 77082

I've seen also that it is possible to chang the inferior part of frontal car! In MINI they sayed that's NOT possible!

Save