Mini Cooper Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
19 Posts
Discussion Starter · #1 · (Edited)
IF anyone needs help or want me to do coding for them happy to do that remotely. I was able to dig up some new options which other claim do not work for them. Also still discovering more options. Happy to help, I am not charging anything .. coz its so simple I don't think someone should charge a thing.

Anyway PM if you need help. :)

These are working on F56

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ACSM:
Disable Welcome 3 Gongs:
3001==>Initialwarnung set to: nicht_aktiv

Turn Off Seat-Belt Reminder Chimes:
3001==>SeatBeltReminder_Fahrer set to: nicht_aktiv (Driver)
3001==>SeatBeltReminder_Beifahrer set to: nicht_aktiv (Passenger)

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
BDC:
Start Car by pushing button (hold clutch/brake not needed)
3020==>TCM_STARTLOCK_BRAKE set to: nicht_aktiv
3020==>TCM_STARTLOCK_CLUTCH set to: nicht_aktiv
3020==>TCM_STARTLOCK_DRIVINGREADINESS set to: nicht_aktiv
New Procedures is as mentioned:
- Press once for iDrive and pumps
- Press a second time and hold to crank engine
Close windows, sunroof & mirror from key fob:
3056==>KOMFORTSCHLIESSUNG_FB set to: aktiv 00
3056==>KOMFORT_SCHLIESSEN set to: WERTE = 00
3110==>ASP_BEIKLAPPEN set to: aktiv (werte=01)
3110==>ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN werte=01
3110==>ASP_AUSKLAPPEN_NACH_KOMFORTSCHLIESSEN werte=01
Enable Illumination of Exterior Door Handle LEDs when in Reverse
3070==>OVT_BEI_REUCKFAHRLICHT set to: aktiv
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
HU_NBT:
Add GPS Current Location to Navi Menu Items
3000==>NAVI_POSITION_MENU set to: aktiv
Enable Developer Menu
3000==>ENTWICKLER_MENUE set to: aktiv 01
Enable Active Sound Design Configuration Menu
3000==>ASD_CONFIGURATION set to: aktiv
DVD-in-Motion activated:
3000==>SPEEDLOCK_X_KMH_MAX set to: werte = FF
3000==>SPEEDLOCK_X_KMH_MIN set to: werte = FF
3000==>VIDEO_HANDBRAKE set to: nicht_aktiv
3000==>VIDEO_FRONT_LOCKED set to: nicht_aktiv
3000==>VIDEO_SPEEDLOCK_CONDITION set to: none=00
Enable Video Files from USB
3000==>ENT_CODEC_XVID set to: aktiv
3000==>ENT_CODEC_XVCD set to: aktiv
3000==>API_USB_VIDEO set to: both
Enable the function of saving video files to NBT Hard Drive for play later
3000==>ENT_MC_VIDEO_SUPPORT set to: aktiv
Disable Office Function Speed Lock-Out
3000==>OFFICE_MESSAGES_SPEEDLOCK_CONDITION set to: nicht_aktiv
Enable Audible Chirp/Beep When Locking Car
3000==>ACOUSTICAL_LOCK_CONFIRM set to: aktiv
Remove Legal Disclaimers:
3001==>LEGAL_DISCLAIMER_TIME set to: kein_ld
3001==>MACRO_CAM_LEGALDISCLAIMER set to: kein_ld
Enable HUD On/Off option in iDrive:
3001==>HUD_ACTIVATION set to: aktiv
Display Tire Pressure & Temperaure in Vehicle Info:
3001==>RDC_SAFETY set to: aktiv 01
Set cell phone ringer as primary
3003==>INBAND_RINGING set to: aktiv – werte=01
Enable Full Text Lines in Office While Driving
3003==>PIM_DRIVING_TEXT_LENGTH set to: whole text_07
Enable Speeach Input for E-Mail or SMS
3003==>SPEECH_2_TEXT set to: aktiv
Enable Time-Stamp Display for Call Log
3003==>TIMESTAMP_DISPLAY set to: aktiv

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
IHKA Module:
A/C System Remembers Last Setting
3003==>MEMORY_OFF set to aktiv-werte=01
Always Remember Air ReCirculating
3003==>MEMORY_UMLUFT set to: aktiv

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
To Activate Blinker in HUD
KOMBI==>3008==>HUD_PIA_BLINKER SET TO : AKTIV
KOMBI==>3003==>HUD_BLINKER_ENABLE SET TO : AKTIV
HU_NBT==>3001==>HUD_TURNSIGNAL SET TO : AKTIV
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Below function I AM GOING TO TEST TODAY AS THIS IS DISABLE IN AUSTRALIA
ENBLE SLI Option to see if that gives me SPEED LIMIT
KOMBI==>3003==>HUD_SLI_TSM_ENABLE SET TO : AKTIV
HU_NBT==>3001==>SPEEDLIMIT_INFO SET TO : AKTIV
Also ADD FA code SLI is option 8TD if its they’re good otherwise need to edit FA.

Cheers

AAHMED
 

·
Registered
Joined
·
100 Posts
Hi Anorexia,

Were you able to enable the speed limit info in Australia?

I've just picked up my JCW and it had the 8TD spec listed, I guess I just need to enable the code to activate this.

Cheers

Andrew
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top