Mini Cooper Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
I just bought a 2009 Mini Cooper S (Canada), and the headlights are aimed low. It has the Xenons. When I was replacing the rear brakes I noticed the the the wires to the rear suspension level sensor were cut. Now I realize that may be preventing the headlights from aiming properly. The problem is, I can't seem to find the other end of the cut wires. Does someone have a picture of where the wiring harness on the vehicle is?

Also, if this doesn't work, is there another way to aim the Xenons?

Thanks
 

·
Super Moderator
Joined
·
8,831 Posts
This is an f series forum and while we all try to help you need to be on an r series dedicated forum eg total mini or nam for real experts! Theres a thread on here on how to alter the lamps with the knurled screws at the rear of the unit but not sure if your r series car will be the same. Worth a look though!
 

·
Registered
Joined
·
407 Posts
Try real OEM to see if there is anything you can determine from the schematics.
 
  • Like
Reactions: jeremybingham
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top