Mini Cooper Forum banner

1 - 20 of 92 Posts

·
MiniF56.com Vendor
Joined
·
61 Posts
Discussion Starter #1
Remus USA Inc. is the official US Importer and Distributor for REMUS Exhaust Systems! We have released the new REMUS sport exhaust for the F56 Mini Cooper S 2014=>

Shot blasted stainless steel sport exhaust system, fitted with integrated
valves which are controlled by a remote control unit that is supplied with the system.

This is available as an Axle Back set up or as a full Cat Back set up and we offer the option of a front silencer or a racing tube for the cat back section.

We offer two sets of tip options. The first is 2 chrome tail pipes Ø 102 mm angled with adjustable spherical clamp connection. The other is 2 Carbon Fiber with Titanium internals Ø 102 mm angled with adjustable spherical clamp connection.

Please feel free to PM me with any inquiries and I will be more than
happy to assist.

Please check out our official website RemusUSA - www.remususa.com



755014 097- Stainless steel sport exhaust with integrated valve and EEC
homologation. For the valve, a remote controlled unit is supplied

755014 0300- Stainless steel front silencer, with EEC homologation

0026 70CS- Tail pipe set 2 tail pipes Ø 102 mm Carbon angled with
Titanium internals and adjustable spherical clamp connection










0026 70CS


0026 70S


0026 70CS


755014 0300



 

·
Registered
Joined
·
185 Posts

·
Registered
Joined
·
508 Posts
It would have been interesting if they had included the dyno curves with the exhaust valve closed, since I presume that one is with valve open. But maybe it doesn't make a difference and has only been included to please the noise=manliness buyers.
 

·
MiniF56.com Vendor
Joined
·
61 Posts
Discussion Starter #13
Hello Peter. Currently we are only offering a system for the S at this point. I am not sure if it will be in our production but if we have enough interest that can change. I will update as I receive info. Thanks for your inquiry.
 

·
MiniF56.com Vendor
Joined
·
61 Posts
Discussion Starter #14
@nicktsigos. A full cat back does not require any cutting and is a bolt on system using factory hang points. If you were to go with just the axle back section it is cut and splice and we provide the hardware to do so. Just slips on and clamps to the factory pipe. Hope this clears it up and I will PM you with the pricing.
 

·
MiniF56.com Vendor
Joined
·
61 Posts
Discussion Starter #15
@MCS535. We currently only have sound clip for the cat back set up. I will search around and see if I can find some sound clips for just the axle back. The axle back does come with the valve control and is homologated. I'll keep you posted regarding the sound clip.

Mike
 

·
Super Moderator
Joined
·
1,480 Posts
Hello Peter. Currently we are only offering a system for the S at this point. I am not sure if it will be in our production but if we have enough interest that can change. I will update as I receive info. Thanks for your inquiry.
Thank you Mike. Do you have any under car pictures of the cat back, axle back and full system for the S? This might give some members perspective. Thanks again for your time.
 

·
Registered
Joined
·
185 Posts
The user called Suntech on here has just the axle back.

Sounds good too - but for me personally its all about the racing tube!!
 

·
MiniF56.com Vendor
Joined
·
61 Posts
Discussion Starter #20
Peter,

I am including a link for a video that Vivid Racing created when they installed the system at their shop for a customer of theirs. They show some pretty good undercarriage shots of the system after it was installed. From the 18 seconds to 31 seconds they show some really nice close up shots from underneath. For some reason I cannot embed the video so I have to include a link. If I come across any additional pictures I will go ahead and post them here. Hope this helps.
Mike

https://www.youtube.com/watch?v=z-vO7Q-D-kw
 
1 - 20 of 92 Posts
Top