Mini Cooper Forum banner

2015 1.2 Mini One - drivetrain error

1.5K views 4 replies 3 participants last post by  Shizzy P  
#1 ·
Hello all!

My 2015 Mini One has an infrequent drivetrain error. The car is the 1.2 litre turbo 3 cylinder.

Occasionally, when pressing the start button, the engine won’t tick over. A drivetrain issue appears on the dash. This disappears after shutting down the car and restarting it again, as if nothing has ever happened!

I’ve noticed during cold starts in particular, the car will start up as normal then the revs will begin to fall until the engine cuts out completely, requiring manual restarting again.

On top of this, there have been times when the engine ‘start stop’ function will not restart the engine after depressing the clutch (instead, the same drivetrain error appears). I have to completely shut down the car and then restart it.

On one occasion, the car wouldn’t turn over, so I shut it down and then restarted the car as I normally would, except there was an amber engine warning light. I felt a significant decrease in engine responsiveness and performance. Essentially the car was in limp-home mode.

I don’t know if all these issues are interlinked. I’ve heard theories that it could be turbo bearing issue, or a fuel injector problem, or perhaps a starter motor fault. Hoping experts here can help me out a little, would love to hear any similar stories or thoughts of how to proceed. Thanks for your time!

Image

Image
 
Discussion starter · #3 ·
Have you pulled the codes?
Unfortunately not, so I am looking into getting one of those OBD scanners to scan for codes. Issue is we cannot take it to a mechanic to pull the codes for us because we can never predict when the issue will pop up.
 
Discussion starter · #5 ·
Quick update:

This morning a similar repeat of the issue I described, except this time an engine warning light appeared and would not go away. I kept trying to clear it by turning the car on and off and then on the fifth try the car sounded a bit louder (I believe it was only firing on 2 of the 3 cylinders). In conclusion, the issue has gotten worse.

I will try and take the car to a garage this week to get it all checked over, but in the meantime, here are the codes (and warning lights) I was able to pull from the OBD.
 

Attachments